Net-SNMP 5.9.4
- Homepage: http://www.net-snmp.org/
- Manpage: http://www.net-snmp.org/docs/man/
- Changelog: http://www.net-snmp.org/download.html
- Repository: https://github.com/net-snmp/net-snmp
- Package: master/make/pkgs/netsnmp/
- Maintainer: @fda77
Net-SNMP (Simple Network Management Protocol) includes an open source SNMPd agent to monitor and administer SNMP capable network devices like routers and switches. You can poll the snmpd agent on the router to obtain e.g. interface or CPU statistics information and display this in a nice graph with the help of a program like MRTG More info about Net-SNMP can be found via: http://www.net-snmp.org/
Creating a Feetz Image with Net-SNMP
Follow the directions from the Wiki After the following step you can configure the packages you want to have included in your image.
make menuconfig
Make sure the following is selected (so I have 1 out of 3 selected):
Package selection ---> Standard packages ---> [*] Net-SNMP 5.4.2.1 snmpd
Package selection ---> Standard packages ---> [ ] With openssl encryption (NEW)
Package selection ---> Standard packages ---> [ ] With zlib compression (NEW)
Setup in Freetz web-interface
conf
First you should create a snmpd.conf file. This file contains all configuration options for Net-SNMP, including a community string, which you can regard as a password for access control. A full description of all possible parameters can be found in the online manual page: http://www.net-snmp.org/docs/man/snmpd.conf.html You can edit the snmpd.conf file via the Freetz web-interface via Net-SNMP > snmpd.conf
If you would like to have a minimal config you can use the following:
rocommunity public
rwcommunity private
This way access contol is only based on the communiy string.
I found an example config with more accss contol options in one of the attachments in this thread: http://www.ip-phone-forum.de/showthread.php?t=122073 This shows how to control access based on source IP address range with additional options to restrict access.
## sec.name source community
## ======== ====== =========
com2sec readonly 127.0.0.0/8 <community string>
com2sec readonly 192.168.0.0/16 <community string>
#com2sec paranoid default <community string>
com2sec paranoid 172.16.0.0/16 <community string>
## Access.group.name sec.model sec.name
## ================= ========= ========
group MyROSystem v1 paranoid
group MyROSystem v2c paranoid
group MyROSystem usm paranoid
group MyROGroup v1 readonly
group MyROGroup v2c readonly
group MyROGroup usm readonly
## MIB.view.name incl/excl MIB.subtree mask
## ============== ========= =========== ====
view all included .1 80
view system included .1.3.6.1.2.1.1
## MIB
## group.name context sec.model sec.level prefix read write notif
## ========== ======= ========= ========= ====== ==== ===== =====
access MyROSystem "" any noauth exact system none none
access MyROGroup "" any noauth exact all none none
If you only allow access from inside your trusted network you can use the default community string, which is for readonly public and for readwrite private. More information on the View-Based Access Control Model (VACM) can be found on the Net-SNMP Wiki
setup
After saving a snmpd.conf file using the Net-SNMP > snmpd.conf setup page you can enable Net-SNMP to start automatically at bootup.
verify
With many Linux distributions you als have snmp tools included like snmpget, snmpset, snmpwalk, … A quick guide how to use these tools can be found on the net-snmp.org site.
Some commands: To get a list of interface descriptions (ifDesc):
snmpwalk -v 2c -c
192.168.178.1 .1.3.6.1.2.1.2.2.1.2
snmpwalk -v 2c -c
-O a 192.168.178.1 .1.3.6.1.2.1.2.2.1.2
To get a list of all available objects:
snmpwalk -v 2c -c
192.168.178.1 .1
MRTG
The Multi Router Traffic Grapher will allow you to generate nice graphs of the data available via SNMP. This can be system information like uptime, interface information and statistics, and more. The graphs can help a lot with trouble clearing issues, both with the FritsBox (e.g. CPU memory), and in the network. For more info see the MRTG site.
Here an example on the graph you can generate:
Installing MRTG
I installed MRTG on a Win7 pc. For this I followed the Windows Installation Guide.
I also installed MGTG as a service.
MRTG Config file
You can generate a initial config file with the cfgmaker tool. This will query the snmp agent, and from the obtained info a config file is created:
perl cfgmaker public@192.168.178.1 —global “WorkDir: c:\www\mrtg” —output mrtg.cfg
But be aware that I have noticed that interface index numbering changes often at reboot, or when router parameters are changed. For the wifi interfaces ‘wifi0’ and ‘ath0’ of the 7270v3 I have even seen multiple interface indexes were created where only the last created with actual counters. A restart of the snmpd will correct this.
In the generated config file most, if not all, are commented out due to e.g. if there is no speed information found. Start with remove the comments character for one interface, and get this to work. After you have cleared all possible config errors (e.g. watch leading spaces which seems not accepted at some locations), you can add more interfaces. You can also change the ADSL related interfaces to have two speeds (asymmetric) so the percentage of used link speed for up and down is more realistic.
Here my current config for the 7270v3: I added config for monitoring CPU load (1, 5, and 15 minutes average), CPU Usage, and Memory usages. This to help with trouble shooting performance issues. A good explanation of how to interpret the CPU load values can be found here.
# Created by
# cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg.cfg
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
WorkDir: c:\Users\<user>\www\mrtg
RunAsDaemon: yes
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System: fritz.fonwlan.box
# Description: Linux fritz.fonwlan.box 2.6.19.2 #1 Fri Apr 8 14:13:30 CEST 2011 mips
# Contact: root@localhost
# Location: Unknown
######################################################################
## Interface 1 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1:
SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0"
MaxBytes[192.168.178.1_cpmac0]: 12500000
Title[192.168.178.1_cpmac0]: Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch
PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>cpmac0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 2 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * it is a Software Loopback interface
Target[192.168.178.1_lo]: \lo:public@192.168.178.1:
SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
MaxBytes[192.168.178.1_lo]: 1250000
Title[192.168.178.1_lo]: Traffic Analysis for 2 -- lo Local Loopback Interface
PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 2 -- lo Local Loopback Interface</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lo </td>
</tr>
<tr>
<td>ifType:</td>
<td>softwareLoopback (24)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1250.0 kBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>127.0.0.1 (localhost)</td>
</tr>
</table>
</div>
### Interface 3 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has no ifSpeed property
#
# Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1:
# SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0"
# MaxBytes[192.168.178.1_sit0]: 0
# Title[192.168.178.1_sit0]: Traffic Analysis for 3 -- sit0
# PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 3 -- sit0</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>fritz.fonwlan.box in Unknown</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>root@localhost</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>sit0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>Encapsulation Interface (131)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>No Name</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>
## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1:
SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0"
MaxBytes[192.168.178.1_eth0]: 12500000
Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0
PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>eth0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 6 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_lan]: \lan:public@192.168.178.1:
SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan"
MaxBytes[192.168.178.1_lan]: 12500000
Title[192.168.178.1_lan]: Traffic Analysis for 6 -- lan (eth + wifi)
PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 6 -- lan (eth + wifi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lan </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>169.254.1.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 7 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest]: \guest:public@192.168.178.1:
SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest"
MaxBytes[192.168.178.1_guest]: 6750000
Title[192.168.178.1_guest]: Traffic Analysis for 7 -- guest (Guest WiFi)
PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 7 -- guest (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.179.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 22 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1:
SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0"
MaxBytes[192.168.178.1_wifi0]: 6750000
Title[192.168.178.1_wifi0]: Traffic Analysis for 22 -- wifi0
PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 22 -- wifi0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1:
SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0"
MaxBytes[192.168.178.1_ath0]: 6750000
Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0
PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 30 >> Descr: 'guest1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest1]: \guest1:public@192.168.178.1:
SetEnv[192.168.178.1_guest1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="guest1"
MaxBytes[192.168.178.1_guest1]: 6750000
Title[192.168.178.1_guest1]: Traffic Analysis for 30 -- guest1 (Guest WiFi)
PageTop[192.168.178.1_guest1]: <h1>Traffic Analysis for 30 -- guest1 (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>6.75 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
### * has no ifSpeed property
Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1:
SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl"
MaxBytes1[192.168.178.1_dsl]: 1500000
MaxBytes2[192.168.178.1_dsl]: 128000
Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl
PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>dsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>ppp (23)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1:
SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl"
MaxBytes1[192.168.178.1_adsl]: 1500000
MaxBytes2[192.168.178.1_adsl]: 128000
Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm
PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>adsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>atm (37)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1:
SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs"
MaxBytes1[192.168.178.1_sixxs]: 1500000
MaxBytes2[192.168.178.1_sixxs]: 128000
Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs
PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>sixxs </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
# Router CPU one minute load averages
Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1:
RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.1]: 1000
Title[cpu.1]: CPU LOAD
PageTop[cpu.1]: <H1>CPU one minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>One minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.1]: avg cpu/min
Factor[cpu.1]: 0.01
YLegend[cpu.1]: CPU Utilization
Legend1[cpu.1]: CPU Utilization (Load)
Legend2[cpu.1]: CPU Utilization (Load)
Legend3[cpu.1]:
Legend4[cpu.1]:
LegendI[cpu.1]:
LegendO[cpu.1]: Usage
Options[cpu.1]: gauge, unknaszero
# Router CPU five minute load averages
Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1:
RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1:
MaxBytes[cpu.2]: 1000
Title[cpu.2]: CPU LOAD
PageTop[cpu.2]: <H1>CPU five minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Five minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.2]: avg cpu/5 min
Factor[cpu.2]: 0.01
YLegend[cpu.2]: CPU Utilization
Legend1[cpu.2]: CPU Utilization (Load)
Legend2[cpu.2]: CPU Utilization (Load)
Legend3[cpu.2]:
Legend4[cpu.2]:
LegendI[cpu.2]:
LegendO[cpu.2]: Usage
Options[cpu.2]: gauge, unknaszero
# Router CPU fifteen minute load averages
Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1:
RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.3]: 1000
Title[cpu.3]: CPU LOAD
PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Fifteen minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.3]: avg cpu/15 min
Factor[cpu.3]: 0.01
YLegend[cpu.3]: CPU Utilization
Legend1[cpu.3]: CPU Utilization (Load)
Legend2[cpu.3]: CPU Utilization (Load)
Legend3[cpu.3]:
Legend4[cpu.3]:
LegendI[cpu.3]:
LegendO[cpu.3]: Usage
Options[cpu.3]: gauge, unknaszero
# Router CPU Utilization ssCpuIdle.0
Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1:
RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.idle]: 1000
Title[cpu.idle]: CPU Utilization
PageTop[cpu.idle]: <H1>CPU Utilization</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>CPU Utilization</td>
</tr>
</table>
</div>
ShortLegend[cpu.idle]: %
YLegend[cpu.idle]: CPU Utilization
Legend1[cpu.idle]: CPU Utilization %(Load)
Legend2[cpu.idle]: CPU Utilization %(Load)
Legend3[cpu.idle]:
Legend4[cpu.idle]:
LegendI[cpu.idle]:
LegendO[cpu.idle]: Usage
Options[cpu.idle]: gauge, unknaszero
# Router Used Memory = Memory - Free Memory
# The total memory can be obtained from /proc/meminfo
# For the 7390 the MemTotal = 109168 kB
# For the 7270v3 the MemTotal = 59716 kB
Target[mem.used]: 59716 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1:
RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1:
MaxBytes[mem.used]: 59716
Title[mem.used]: Used Memory
PageTop[mem.used]: <H1>Used Memory</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7270</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Used Memory</td>
</tr>
</table>
</div>
ShortLegend[mem.used]: kBytes
YLegend[mem.used]: Used Memory
Legend1[mem.used]: Used Memory (Total is 59716)
Legend2[mem.used]: Used Memory (Total is 59716)
Legend3[mem.used]:
Legend4[mem.used]:
LegendI[mem.used]:
LegendO[mem.used]: Usage
Options[mem.used]: gauge, unknaszero
WorkDir: c:\Users\<user>\www\mrtg
For the 7390 I have the following config (not so much different).
# Created by
# cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg_7390.cfg
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
WorkDir: c:\Users\<user>\www\mrtg
RunAsDaemon: yes
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System: fritz.fonwlan.box
# Description: Linux fritz.fonwlan.box 2.6.28.10 #1 Thu Mar 21 15:33:40 CET 2013 mips
# Contact: root@localhost
# Location: Unknown
######################################################################
## Changes to use RRDTool as explained in: http://oss.oetiker.ch/mrtg/doc/mrtg-rrd.en.html
# LogFormat: rrdtool
# PathAdd: c:\rrdtool\rrdtool-1.4.7\win32\Debug
# LibAdd: c:\rrdtool\rrdtool-1.4.7\bindings\perl-shared
## Interface 1 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * it is a Software Loopback interface
Target[192.168.178.1_lo]: \lo:public@192.168.178.1:
SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
MaxBytes[192.168.178.1_lo]: 1250000
Title[192.168.178.1_lo]: Traffic Analysis for 1 -- lo Local Loopback Interface
PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 1 -- lo Local Loopback Interface</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lo </td>
</tr>
<tr>
<td>ifType:</td>
<td>softwareLoopback (24)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1250.0 kBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>127.0.0.1 (localhost)</td>
</tr>
</table>
</div>
### Interface 2 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has no ifSpeed property
#
# Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1:
# SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0"
# MaxBytes[192.168.178.1_sit0]: 0
# Title[192.168.178.1_sit0]: Traffic Analysis for 2 -- sit0
# PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 2 -- sit0</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>fritz.fonwlan.box in Unknown</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>root@localhost</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>sit0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>Encapsulation Interface (131)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td>No Name</td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# <tr>
# <td>Ip:</td>
# <td>No Ip (No DNS name)</td>
# </tr>
# </table>
# </div>
## Interface 3 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1:
SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0"
MaxBytes[192.168.178.1_cpmac0]: 128000000
Title[192.168.178.1_cpmac0]: Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch
PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>cpmac0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>128 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1:
SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0"
MaxBytes[192.168.178.1_eth0]: 12500000
Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0
PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>eth0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 5 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_lan]: \lan:public@192.168.178.1:
SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan"
MaxBytes[192.168.178.1_lan]: 12500000
Title[192.168.178.1_lan]: Traffic Analysis for 5 -- lan (eth + wifi)
PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 5 -- lan (eth + wifi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>lan </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>12.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>169.254.1.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 6 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_guest]: \guest:public@192.168.178.1:
SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest"
MaxBytes[192.168.178.1_guest]: 37500000
Title[192.168.178.1_guest]: Traffic Analysis for 6 -- guest (Guest WiFi)
PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 6 -- guest (Guest WiFi)</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>guest </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>192.168.179.1 (No DNS name)</td>
</tr>
</table>
</div>
## Interface 19 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1:
SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0"
MaxBytes[192.168.178.1_wifi0]: 37500000
Title[192.168.178.1_wifi0]: Traffic Analysis for 19 -- wifi0
PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 19 -- wifi0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 20 >> Descr: 'wifi1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_wifi1]: \wifi1:public@192.168.178.1:
SetEnv[192.168.178.1_wifi1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi1"
MaxBytes[192.168.178.1_wifi1]: 37500000
Title[192.168.178.1_wifi1]: Traffic Analysis for 20 -- wifi1
PageTop[192.168.178.1_wifi1]: <h1>Traffic Analysis for 20 -- wifi1</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>wifi1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1:
SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0"
MaxBytes[192.168.178.1_ath0]: 37500000
Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0
PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 26 >> Descr: 'ath1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_ath1]: \ath1:public@192.168.178.1:
SetEnv[192.168.178.1_ath1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath1"
MaxBytes[192.168.178.1_ath1]: 37500000
Title[192.168.178.1_ath1]: Traffic Analysis for 26 -- ath1
PageTop[192.168.178.1_ath1]: <h1>Traffic Analysis for 26 -- ath1</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>ath1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>37.5 MBytes/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1:
SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl"
MaxBytes1[192.168.178.1_dsl]: 1500000
MaxBytes2[192.168.178.1_dsl]: 128000
Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl
PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>dsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>ppp (23)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1:
SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl"
MaxBytes1[192.168.178.1_adsl]: 1500000
MaxBytes2[192.168.178.1_adsl]: 128000
Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm
PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>adsl </td>
</tr>
<tr>
<td>ifType:</td>
<td>atm (37)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ###
## The following interface is commented out because:
## * has no ifSpeed property
Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1:
SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs"
MaxBytes1[192.168.178.1_sixxs]: 1500000
MaxBytes2[192.168.178.1_sixxs]: 128000
Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs
PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box in Unknown</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>sixxs </td>
</tr>
<tr>
<td>ifType:</td>
<td>Other (1)</td>
</tr>
<tr>
<td>ifName:</td>
<td>No Name</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td>
</tr>
<tr>
<td>Ip:</td>
<td>No Ip (No DNS name)</td>
</tr>
</table>
</div>
# Router CPU one minute load averages
Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1:
RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.1]: 1000
Title[cpu.1]: CPU LOAD
PageTop[cpu.1]: <H1>CPU one minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>One minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.1]: avg cpu/min
Factor[cpu.1]: 0.01
YLegend[cpu.1]: CPU Utilization
Legend1[cpu.1]: CPU Utilization (Load)
Legend2[cpu.1]: CPU Utilization (Load)
Legend3[cpu.1]:
Legend4[cpu.1]:
LegendI[cpu.1]:
LegendO[cpu.1]: Usage
Options[cpu.1]: gauge, unknaszero
# Router CPU five minute load averages
Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1:
RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1:
MaxBytes[cpu.2]: 1000
Title[cpu.2]: CPU LOAD
PageTop[cpu.2]: <H1>CPU five minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Five minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.2]: avg cpu/5 min
Factor[cpu.2]: 0.01
YLegend[cpu.2]: CPU Utilization
Legend1[cpu.2]: CPU Utilization (Load)
Legend2[cpu.2]: CPU Utilization (Load)
Legend3[cpu.2]:
Legend4[cpu.2]:
LegendI[cpu.2]:
LegendO[cpu.2]: Usage
Options[cpu.2]: gauge, unknaszero
# Router CPU fifteen minute load averages
Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1:
RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.3]: 1000
Title[cpu.3]: CPU LOAD
PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Fifteen minute load averages</td>
</tr>
</table>
</div>
ShortLegend[cpu.3]: avg cpu/15 min
Factor[cpu.3]: 0.01
YLegend[cpu.3]: CPU Utilization
Legend1[cpu.3]: CPU Utilization (Load)
Legend2[cpu.3]: CPU Utilization (Load)
Legend3[cpu.3]:
Legend4[cpu.3]:
LegendI[cpu.3]:
LegendO[cpu.3]: Usage
Options[cpu.3]: gauge, unknaszero
# Router CPU Utilization ssCpuIdle.0
Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1:
RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1:
MaxBytes[cpu.idle]: 1000
Title[cpu.idle]: CPU Utilization
PageTop[cpu.idle]: <H1>CPU Utilization</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>CPU Utilization</td>
</tr>
</table>
</div>
ShortLegend[cpu.idle]: %
YLegend[cpu.idle]: CPU Utilization
Legend1[cpu.idle]: CPU Utilization %(Load)
Legend2[cpu.idle]: CPU Utilization %(Load)
Legend3[cpu.idle]:
Legend4[cpu.idle]:
LegendI[cpu.idle]:
LegendO[cpu.idle]: Usage
Options[cpu.idle]: gauge, unknaszero
# Router Used Memory = Memory - Free Memory
# The total memory can be obtained from /proc/meminfo
# For the 7390 the MemTotal = 109168 kB
# Without Swap:
# Target[mem.used]: 109168 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1:
# With Swap enabled:
Target[mem.used]: .1.3.6.1.4.1.2021.4.5.0&.1.3.6.1.4.1.2021.4.5.0:public@192.168.178.1 - .1.3.6.1.4.1.2021.4.6.0&.1.3.6.1.4.1.2021.4.6.0:public@192.168.178.1
RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1:
MaxBytes[mem.used]: 109168
Title[mem.used]: Used Memory
PageTop[mem.used]: <H1>Used Memory</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>fritz.fonwlan.box 7390</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>root@localhost</td>
</tr>
<tr>
<td>Description:</td>
<td>Used Memory</td>
</tr>
</table>
</div>
ShortLegend[mem.used]: kBytes
YLegend[mem.used]: Used Memory
Legend1[mem.used]: Used Memory (Total is 109168)
Legend2[mem.used]: Used Memory (Total is 109168)
Legend3[mem.used]:
Legend4[mem.used]:
LegendI[mem.used]:
LegendO[mem.used]: Usage
Options[mem.used]: gauge, unknaszero
WorkDir: c:\Users\<user>\www\mrtg
One page overview
MRTG offers a tool to generate a web-page with for a specific period, e.g. all one-day graphs of all configured targets on one page. In a dos-box in the mrtg\bin directory execute the following (replace